MediCarePlus - radio
MedicarePlus - Concept
MediCarePlus is the highest quality management software for nurse call systems. Save time installing and give yourself the edge that you need when giving orders for installations of new nurse call systems or doing maintenance on existing installations. We provide generous licensing agreements - which are cost effective for your clients and come with valuable additional functions for basic licensing. That way mixed environments like wired and radio solutions can be combined elegantly and simply and managed using a single admin interface.
Gets Wireless - Funk
Mobile Call Trigger (R/5006)
- Medaillon: As a bracelet or pendant around the neck
- Antibacterial and waterproof housing
- Can be used as travel- or patient protection
- IP 67, NFC, Clip
Nurse call receiver: Smartpager (102547)
- View current calls
- Call details (location and call type)
- Accepting the message
- Rejecting the message
Wall Call Trigger (R/5101)
- Antibacterial front panels
- Flat housing base, no wall installation
- Battery monitoring
- Clear identification of call triggers
- Simple and fast configuration or reconfiguration
Fixed call release (R/5103) - Tear-off function
- Antibacterial front panels
- Flat housing base, no wall installation
- Battery monitoring
- Clear identification of call triggers
- Simple and fast configuration or reconfiguration
Fixed call trigger (R/5107) - Pull button
- Antibacterial front panels
- Flat housing base, no wall installation
- Battery monitoring
- Clear identification of call triggers
- Simple and fast configuration or reconfiguration
GETS Floor mat (102777)
Placed in front of the nursing bed, the mat immediately sounds the alarm if the person in need of care leaves the bed and places his foot on the floor mat.
Light call Hublot (103047)
The lamp is located in the hallway above the room door and allows staff to see if a call is being sent from the room. The 3 illuminated fields allow the different call types to be distinguished by means of individually adjustable colour codes.
Repeater (R/5201.2 and R/5202.2)
The repeaters are the traffic hubs of Gets wireless solution.
The calls of the call triggers are transmitted from repeater to repeater up to the radio HUB.
The repeaters do not require any configuration. To monitor whether they function correctly, only identification in the wireless hub is required
Power supply: 24V or 230V for more flexibility. In the second case, a battery is also integrated for even greater safety.
Position beacon (R/5501)
Positioning
The call beacons can also be used to determine the last known position of a mobile call trigger, which allows the caller to be located more quickly
access blockade
Receivers R/5406 or R/5407 can be added to close a contact as soon as a mobile call trigger enters the coverage area of an item transmitter
This contact can then be used as a command to close a door or block an elevator.
Power supply: 230V
Ferrit antenna (R/5504)
Premo ferrite antenna for the position transmitter R/5501 or R/5502
Funk Hub 868MHz (R/5301)
The radio HUB is the interface between the wireless solution and MediCarePlus.
GEC CAN Bus TCP Gateway
Gets Easy Connect (GEC) communicates via the communication bus called CAN (Controller Area Network). This bus brings robustness and an enormous speed to the existing cable installation. The installation is therefore plug and play.
Technical data MediCarePlus
- Management of several HUBs (Gets radio)
- Management of several 3000 MCPE (Gets wired)
- Alarming on DECT (Mitel, Unify, Alcatel, Panasonic, etc.), smartphones, Gets pagers, Gets displays, Windows Clients, text messages, emails, etc.
- GETS bus, CANBUS
- Technical potential free contacts
- 60 further interfaces
- Statistics, protocols, patients, databases
- Call groups, call plans, annual plans, time switches, timers
- Unlimited management of alarm triggers
- Gets wireless and Gets wired can be connected and managed at the same time
1995 © ATT AG. ALL Rights Reserved - Swiss Made Products Contact - Support - Data privacy statement